April 5, 2019

Mass production is ongoing. Production lead time has improved significantly since our initial production run.

Average production defect rate in 2018 was 1.5%. Our engineering team and manufacturing partners continuous to optimize the production procedures and QC standards. We aim to reduce the defect rate down to 0.5% by the 2nd quarter of 2019.

November 22, 2018

Many of our earliest customers have received the Drumi and shared their feedback with us. We love seeing the Drumi in action.

August 24, 2018

We have the good news you’ve been waiting so eagerly to hear: Drumi delivery has begun!

Shipping Address Confirmation email has been sent to our earliest adopters. Ocean freight generally take 3 weeks to arrive. If you didn’t receive the confirmation email, it is likely because we are still processing your pre-order. We are preparing the next container now and will reach out to more of you in the coming weeks.

Production is ongoing and we are working around the clock to get you Drumi to you as soon as possible.

July 31, 2018

Drumi is now in fulfillment stage. We will notify you when your pre-order is being shipped.

June 15, 2018

Here is a quick update on what we’ve done to ensure that happens.

In Q1 2018, we moved from the product development stage to the mass production stage. Our engineering team and seasoned suppliers faced many unexpected challenges because they’ve never experienced a new product like Drumi before.

After many sleepless nights, we’ve accomplished the following:

  • Improved stamping tooling modification for better production stability.

  • Optimized Aluminium alloy coating for better anti-corrosion result.

  • Reinforced base structure.

  • Standardized quality control procedure.

  • Optimized material selection.

  • Special order...

March 23, 2018

Showering to Savings

In an average home, showers are typically the third largest water use after toilets and clothes washers. The average American shower uses 17.2 gallons (65.1 liters) and lasts for 8.2 minutes at average flow rate of 2.1 gallons per minute (gpm) (7.9 lpm).

Shower Water Saving Tips

  1. Pay attention to the length of time spent in the shower. Try taking a shorter shower of around 5 minutes.

  2. If you shower is equipped with an on-off switch use it while you are soaping and shampooing.

  3. If you have to wait a period of time for the hot water to reach the shower, try collecting the normally discarded cold water i...

January 31, 2018

January has been an incredible month at Yirego. We are managing multiple manufacturing lines and have made a lot of progress. All die-casting parts, including the drive units have passed 100% inspection and demonstrated a manufacturing ability in excess of 1000 sets per month.  

Salt spray tests were performed on the stainless steel drum with 4 different types of protective finish, a winner was selected base on the corrosion resistance result.

To date, our primary production constraint has been with our bearing supplier. The combined complexity of one-way design and high corrosion resistance requirement has taken these bearings l...

May 29, 2017

Using Too Much Laundry Detergent

It’s easy to assume that more soap means cleaner clothes but residue from too much laundry detergent can make your clothes look dingy. It also wastes soap and can require extra wash or rinse cycles, which wastes water, energy, and money.

Overloading the Machine

You may feel good about cramming clothes into the washing machine, thinking you’re saving time or conserving water but the detergent needs space to move around. When you overload your washing machine, they turn into one large mass and it does not get cleaned properly. You may even notice damage on your garments because they are packed too clos...

Please reload

About Us

Copyright 2019 - Yirego Corp.

  • Instagram - White Circle
  • YouTube - White Circle
  • Twitter - White Circle
  • Facebook - White Circle